At a glance
Customer: Organic fertilizer producer in India
Problem: Compost fermentation needed regular turning for aeration and uniformity
Solution: YUSHUNXIN supplied a groove-type compost turner matched to the customer's groove width and pile height. The machine runs along the rails above the groove, turning and aerating the material in one pass, with the gearbox a...
Result: Groove compost turner fabricated and tested
| Customer type | Organic fertilizer producer in India |
| Industry / project type | Compost Turner |
| Capacity | Groove type |
| Country / region | India |
| Year | 2026 |
Start a similar project
Tell us your raw materials, capacity and target market. We will compare your conditions with this project and recommend the right configuration.
Product Inquiry
Tell us about your project — we reply within 24 hours (24/7).
Why the project happened
An Indian organic fertilizer producer needed a groove-type compost turner for windrow fermentation of compost. The machine is used to aerate, mix and homogenize the compost pile so fermentation completes faster and more evenly. The customer required export packing for sea freight to India.
What the customer faced
These are the specific issues the project was built to solve.
- Compost fermentation needed regular turning for aeration and uniformity
- Manual turning was slow and inconsistent
- Machine needed to run along the groove with low operator effort
- Export packing required for shipment to India
Limits we designed around
Real projects are never ideal. These constraints shaped the configuration and delivery plan.
- Groove width and pile height defined the machine span and clearance
- Sea freight to India with limited container space
Why we configured it this way
YUSHUNXIN supplied a groove-type compost turner matched to the customer's groove width and pile height. The machine runs along the rails above the groove, turning and aerating the material in one pass, with the gearbox and drive sized for continuous operation in a compost plant.
How it was delivered
From requirements confirmation to commissioning - the key nodes of this project.
Requirements confirmation
Confirmed groove width, pile height and material type with the Indian producer.
Engineering & configuration
Sized the turning rotor, span and drive for the customer's groove dimensions.
Fabrication & assembly
Fabricated the turner with corrosion-resistant contact parts for compost conditions.
No-load testing & export packing
Assembled and tested the drive, then export-packed the machine on a steel frame.
Container loading & dispatch
Loaded and dispatched to India with the manual and spare-parts list.
Difficult points and how we solved them
Matching groove dimensions
Confirmed groove width and pile height before fabrication so the machine fits the customer's existing shed.
Corrosive compost environment
Selected corrosion-resistant contact parts and a sealed drive arrangement.
What changed after delivery
Verifiable changes from this project. Where specific figures are confidential, we state the direction and the evidence.
- Groove compost turner fabricated and tested
- Export-packed and shipped to India
- Dimensions matched to the customer's groove for fast installation
Project outcome
Machine delivered for installation in the customer's compost plant.
What similar customers can learn
A groove turner only pays off when it matches the groove width, pile height and daily turning volume. Send the groove dimensions and material type first; the machine is then sized around those limits.
Questions from similar projects
What do I need to confirm before ordering a groove turner?
Can the turner handle high-moisture manure compost?
Your conditions, our configuration
The fastest way to a useful answer is to compare your project against this one: raw materials, capacity, bag size, site and destination.
Product Inquiry
Tell us about your project — we reply within 24 hours (24/7).