Manure Solid-Liquid Separator (Screw Press)
The Manure Solid-Liquid Separator is a wastewater machine engineered by YUSHUNXIN for Livestock farms, Manure treatment companies and Organic fertilizer plants. It is used for livestock manure dewatering, manure-to-organic-fertilizer projects. Classic screw-press separator for direct manure dewatering — pairs with YUSHUNXIN organic lines.
Manure Solid-Liquid Separator (Screw Press)
Classic screw-press solid-liquid separator for pig, duck, cow and chicken manure — separates slurry into liquid organic fertilizer and solid organic fertilizer.
Why buyers choose it
Proven screw-press separation
Manure-to-fertilizer resource recovery
Simple, rugged operation
Why choose YUSHUNXIN
Classic screw-press separator for direct manure dewatering — pairs with YUSHUNXIN organic lines.
Working principle of the Manure Solid-Liquid Separator
Step 1
Manure slurry is pumped from the pit to the separator
Step 2
Screw press or inclined screen separates solids from liquid
Step 3
Solid fraction discharges for composting / bedding
Step 4
Liquid fraction flows to storage or further treatment
Technical parameters
Reference specifications for Manure Solid-Liquid Separator — final values are confirmed in your technical proposal.
| Output | liquid organic fertilizer + solid organic fertilizer |
How to read these parameters
- Capacity is the reference throughput under typical material conditions. Choose a model with 15–20% headroom above your target output so moisture, bulk density and operating hours do not bottleneck the line.
- Power indicates the installed drive. It determines your site power supply and running cost; tell us your voltage and frequency (e.g. 380V/50Hz, 415V/50Hz, 440V/60Hz) so we match the motor package.
- Every model can be adapted: voltage/frequency, contact material (carbon steel, 304 or 316 stainless steel) and Siemens PLC control are available on request.
What the machine is made of
Core structure and sub-systems of the Manure Solid-Liquid Separator — every part is selected for fertilizer-duty reliability.
Screw press / screen assembly
Physical separation without chemicals
Filter cloth / mesh
Interchangeable for solid content target
Feed pump & control
Matched flow with overload protection
Frame & discharge
Rugged frame for farm conditions
Drive & reducer
Low-speed, high-torque operation
Standard vs optional configuration
| Standard configuration | Full machine assembly, matched motor & reducer, operation manual, export packing |
| Stainless steel option | 304/316 contact parts for corrosive or water-soluble material |
| Control level | Manual / semi-auto / Siemens PLC with recipe management |
| Branded components | Value package (W/N motors, Guomao gearboxes, ZWZ bearings) or premium package (Siemens, SEW, SKF) |
| Voltage & frequency | 380V/50Hz standard; 415V, 440V/60Hz, 525V, 660V customized |
What to prepare on site
Power supply
Installed drive by model; confirm voltage/frequency with our engineers
Footprint
Reference dimensions by model (per model); site layout confirmed before delivery
Operators
1 operator per shift
Site preparation
3-phase power; pump included; hose or pipe connection to slurry pit.
Recommended wear parts
We keep long-term stock for these consumables and ship them worldwide with any complete-line or spare-parts order.
Where it is used — and how to confirm it fits
This Manure Solid-Liquid Separator fits when your project matches one of these use cases. Tell us your raw material, target capacity and moisture so we confirm the configuration before quoting:
Best suited for
- Livestock farms
- Manure treatment companies
- Organic fertilizer plants
Where it is delivered
Factory-direct pricing, short lead times and complete line integration — wherever your project is located.
Customization we can engineer
Standard machines use reliable, field-proven components. For projects that require specified brands, we offer factory-authorized component upgrade packages plus full electrical customization.
Options you can add
- Special voltage & frequency (e.g. 380V/60Hz, 440V, 525V, 660V)
- 304/316 stainless steel contact parts
- Rubber or stainless liners for coating machines
- Siemens PLC control with recipe management and batch logging
- Matched inverter (VFD) packages for variable-speed dosing and conveying
- Wire & cable supply for complete lines
- CE-ready electrical components and documentation on request
Branded component packages
W/N motors · Guomao gearboxes · ZWZ bearings
Siemens motors · SEW gearboxes · SKF bearings
Price adjustments are reference ranges applied to the corresponding equipment scope. Special voltage / frequency and material-contact requirements are always customized.
How we guarantee every machine
Quality is a process, not a label — every YUSHUNXIN machine passes the same five checkpoints before it leaves the factory.
Incoming material inspection
Steel plates, motors, reducers, bearings and electrical parts are checked against brand and specification on arrival.
Fabrication & welding inspection
Shell thickness, welding quality, alignment and surface finish are inspected at each station during fabrication.
Assembly & alignment check
Shafts, gears, rollers, frames and drives are aligned and checked before electrical hook-up.
No-load test run
Every machine is test-run no-load; speed, vibration, noise and temperature are recorded on the test sheet.
Packing & pre-shipment check
Export packing, spare-parts list and documents are double-checked, with photos/video before dispatch.
Packing, delivery and after-sales
Export packaging
Machines are packed for sea freight: steel-frame or plywood cases, anti-rust treatment, waterproof film and clear marking.
Worldwide delivery
FOB, CIF, CFR or door-to-door options; we prepare packing lists, commercial invoices and shipping marks for customs.
Installation & commissioning
Site drawings and assembly guidance are included; on-site engineer supervision is available for complete lines.
Operator training
Manual and video in your language, plus remote guidance via WhatsApp/email during commissioning.
Spare parts support
Long-term supply of wear parts — rollers, dies, blades, screens, nozzles, bearings, reducers, sensors, motors and more.
Warranty & after-sales
12-month machinery warranty and responsive after-sales support from our engineering team.
Why the price varies — and how to get an accurate quote
We do not publish list prices because every fertilizer project is different. This is exactly what makes the difference:
Model & capacity
Larger capacity and heavier construction raise machine cost — but usually lower cost per ton.
Contact material
Carbon steel is standard; 304/316 stainless steel costs more but suits corrosive or food-grade material.
Automation level
Manual, semi-auto and full Siemens PLC control change both price and operating manpower.
Branded components
Standard brands, value package (+8–10%) or premium package (+12–15%) for motors, gearboxes and bearings.
Quantity & packaging
Single machines, complete lines, export packing and spare-parts kits are quoted separately.
Destination & lead time
Freight, port, customs documents and requested delivery time affect the final quotation.
Questions buyers ask before inquiry
Can this Manure Solid-Liquid Separator be customized for my project?
What information do I need for an accurate quotation?
What is the delivery time and how is it shipped?
Do you provide installation guidance and training?
Can I order this machine as part of a complete line?
Do you support branded components or OEM?
Next steps for your project
Request a quotation
For an accurate quotation, please include
The more complete your information, the faster we can respond with a precise proposal.
- Target model or capacity (t/h)
- Raw material and moisture
- Quantity (single machine / complete line)
- Destination country & port
- Voltage & frequency
- Customization (stainless steel / PLC / branded)
- Expected delivery time
Product Inquiry
Tell us about your project — we reply within 2 working days.
